Nowadays, the life standard is better than before, it means that people’s demands will increase quickly, one of requirements that is a place to live. That is why the construction industry more and more developmental and this occupation is the same. In construction environment, there are lots risks and hazards such slips, trips, and falls that we cannot control. Thus, all construction workers who should know useful information below from Some Basic Information of Slips, Trips and Falls on Construction Site You Must Know to improve their safe knowledges on the construction and reduce injures and accidents which can have serious consequences for them. Please click here to get further information of Cscs.
Some Basic Information of Slips, Trips and Falls on Construction Site You Must Know
The Risks Of Trip Hazards
According to the UK’s Health and Safety Executive, there are 40% of injuries in the workplace and the main reason are trips, slips, and falls. It depends on the area and the the distance fallen that injuries can range from lacerations due to sharp ground surfaces, or broken bones due to impact or even more serious penetrating injuries if you fall onto a tool or other dangerous objects. Thus, trip hazards are a dangerous problem both you and other people working on site.
Laws related to trips, slips and falls
Health and safety in construction site or other areas which is always important issue, there is a wide range of legislations are in place to protect employees when it comes to workplace health and safety in the UK. According to The Health and Safety at Work Act (1974), employers employ all reasonably practicable measures to ensure the health and safety of their staff and anyone else affected by their work. In addition, The Management of Health and Safety at Work Regulations 1999 and The Workplace (Health, Safety and Welfare) Regulations 1992 both mandate similar measures which include suitable flooring in the workplace, and compulsory risk assessments and ensuring that floors are free from obstruction. An other hand, it is also important to keep in mind that whilst it is usually the employer who takes the legal brunt when these regulations are breached, employees should also ensure that these standards must be met on their trade.
Minimise Trip Hazards Employers Should Know
On the construction site, both the employers and employees who always have responsibilities for safety in their working environment. For employers, even if an employer does not spend much of their time personally on site, they can use a number of measure to minimize the risk of tripping and falling incidents. In addition, the primary method that an employer can implement is a risk assessment. Thus, the documents are basically a tool helping employers to recognise potential hazards and note them down and decide on measures to minimise or nullify that risk. For example, employers should be considered in wet conditions,resulting in a slippery surface which could be hazardous, and rainwater can be tracked into a building. A lot of measures could be employed to prevent this such as putting down doormats or using a non-slip surface on the floor of temporary site structures. An other hand, when writing a risk assessment that it is very important for an employer when they ask their employees to contribute as staff are on site more often than their employer and as such may notice hazards which escape their employer’s attention. Moreover, you should update usually your risk assessment regularly because of the rare for a workplace’s hazards to remain consistent on the construction site.
Minimise Trip Hazards Employees Should Know
On the construction industry site, most of the practical methods for minimising trip hazards come down to all construction workers, thus determining hazards for staff which is much easier as well as they are more familiar with their work environment. Actually, pooled water, building materials left stacked in commonly used pathways loose carpet, trailing wires and potholes are the risks on the construction site. Thus, to avoid these risks that everyone on site should wear appropriate footwear, not trailing and with their laces tied correctly. Employers should note that trouser legs must not be too long, because they may trail and could cause falls. Moreover, you have to make certain that floors are cleaned regularly and that all spillages are marked and cleaned as soon as possible. Addition to this, entrance matting can help to prevent rainwater from pooling, high-grip matting should be employed to make indoor and outdoor surfaces grip boots more effective in their trade.
You might be also interested in other healthy and safe information:
What Do You Know the Personal Protective Equipment (PPE) on the Construction Site?
6 Key Points of Portable Appliance Testing You Should Know
Identify 5 Popular Fire Extinguishers Colour Code For A Safe Construction Environment
Protect Eyes and Ears on the Construction Site You Need to Know
Some Basic Information of Slips, Trips and Falls on Construction Site You Must Know
Some Basic Information of Slips, Trips and Falls on Construction Site You Must Know which provides information about trips, slips and falls on the construction to help you have overview of risks in your working environment to ensure that you have enough basic construction knowledge for preventing from the risks and the hazards. In order to get more information to improve effectively your safe knowledge, let’s practice free online CSCS mock test for safety at our site.
Leave a Reply