According to the Electricity at Work Regulations in 1989 that both employers and employees who have a responsibilities for electrical safety. Addition to this, employers must have responsibilities for “control the risks” from using electricity, especially, using portable electric appliance. Actually, the law of requirements for electrical safety that these candidates must undergo regular portable appliance testing or called PAT to ensure that employees have enough basic knowledge of electrical safety by what is completed ad a competent person. For employers’ responsibilities that they have to train to their own staff in order to carry out PAT testing and maintenance work or request to an electrical contractor who will do this work. however, these is mainly the employers’ responsibilities such as: firstly, they have to set up a proper maintenance plan to keep portable electrical equipment in safe working order. Secondly, employers’ responsibility that providing all employees using portable electrical appliances with training about safe working environment. Thirdly, make sure that PAT-tested equipment is properly labelled as like tester, details, date. Fourthly, they should keep proper records of all PAT inspections and tests. Finally, it is important to take all faulty equipment which includes any appliance which fails a test, repair and re-test where required before allowing appliances to be put back into use, and out of service immediately.
6 Key Points of Portable Appliance Testing You Should Know
You Should know About Portable Equipment
The definition of portable equipment from The Health and Safety Executive (HSE) that the equipment which is intended to be connected to a generator or fixed installation by means of a cable and either plug and socket or a spur box with including as like hand operated equipment that is intended to be moved while connected to the supply and the appliances have been fixed for security purposes namely hair-dryers and hand dryers in changing rooms and extension leads, sockets and cord sets that supply portable equipment, plugs.
You Should Know About Inspection and Testing
There are two separately activities in portable application equipment. The first thing that is a thorough visual inspection, to check for any signs of deterioration and damage. The second thing, a PAT-device test in which testing requirements depend on the appliance but always include at least an insulation test, additionally, if there is an earth – an earth continuity and leakage test. Always done using a calibrated PAT device in PAT electrical testing.
You Should Know About Risk Assessment
An employer’s risk assessment which will decide if equipment needs a visual inspection or must be PAT-device tested. In addition, it takes into account such as the type of portable appliance, the location in which the appliance is to be used, what the appliance is used for. Actually, a ‘competent person’ will just tackle to PAT inspection, testing and maintenance and additionally it must also include proper labelling and keeping test or inspection records.
You Should Know About Testing Frequency
Normally, PAT testing must be often done an it should also be clearly set out in the risk assessment, and following to: Firstly, this is the type of portable appliance. secondly, its electrical class and power rating, the age of the appliance, the manufacturers instructions, who uses the appliance, the frequency of use, and the location in which the appliance is used. Such that, a PAT test must be carried out immediately if a fault is suspected but cannot be confirmed by just a visual inspection, and it also applies if the appliance has been repaired or modified before it is returned into service.
You Should Know About Class I Equipment or Earthed
If an electrical fault develops and the earth wire becomes loose or detached when the equipment casing could suddenly become live and cause an electric shock, and all earthed equipment is regarded as “high risk”, it must be PAT tested as often as laid down in the risk assessment. Addition to this, any extension lead is regarded as Class I equipment, and it must always be earthed and PAT-tested.
You Should Know About Class II Equipment or Double Insulated
For class II equipment which does not need an earth wire for electrical safety because if both leads and plugs are seldom disturbed and the appliance used in a low-risk location such as an office, and then a visual inspection is required only once every 2-4 years and it is based on whether light or heavy use is involved but class II equipment intended for us by the public, especially children who might need a combined inspection and PAT test every 12 months if there is a strong risk of equipment damage. Actually, more regular and frequent inspection and PAT testing will be necessary where Class II equipment is used in tough,such as outdoors, challenging conditions, or in workshops. Thus, it is done in the best decision by a “competent person” familiar with the equipment and understands the legal requirements for portable appliance testing.
You might be also interested in other healthy and safe information:
What Do You Know the Personal Protective Equipment (PPE) on the Construction Site?
Some Basic Information of Slips, Trips and Falls on Construction Site You Must Know
Identify 5 Popular Fire Extinguishers Colour Code For A Safe Construction Environment
Protect Eyes and Ears on the Construction Site You Need to Know
6 Key Points of Portable Appliance Testing You Should Know
In conclusion, if you want to get more information about portable application test that you can find the website about HSE. This site, we just offer 6 Key Points of Portable Appliance Testing You Should Know to help all you improve your knowledge. In addition, we also offer lots free online CSCS mock test questions and full answers for your Cscs test if you are considering applying for a Cscs card on the construction. Enjoy us now!
Leave a Reply