50 Full Efficiently Free Online CSCS Mock Test Questions

Hey Guys! If you want to apply for a construction work but now you have to take part in the health, safety and environment test to get a Cscs card in your hand. It is important that you should remember that a good preparation which is a key to help you get your target soon. On the construction site, to take a Cscs card that you have to come a test centre around the UK in which you can be convenient to take it. Please click here to get further information of Cscs.

When taking a real test, you will have 45 minutes with 50 basic multiple choice questions to be correctly answered. To help you have a good preparation of many health and safety topics for passing your test, here we suggest 50 Full Efficiently Free Online CSCS Mock Test Questions which is designed to be suitable for your real. Most quiz question focusing on the health and safety topics included your Cscs test. At CSCS exam, it is easy to practice quiz questions and get immediately your result after submitting. In 50 full Cscs mock test questions or in the real test, you will be required a single answer for a questions, but some questions which will require more one answers. Consequently, we offer a few quiz question with requirement that is multiple answers to help you meet this type of questions that they will appear your real test. However, to remember deeply all information from this mock test that you should ensure that you read each question carefully to keep surly its requirement. Hopefully, after testing you will be confident to take your real test as well as get a Cscs card as you want. Have an enjoy time!

Following some links below to get lots useful information about the CSCS test:
All-around Account Of CSCS Test Types And Even More
Where Should You Sit The CSCS Card Test?
A Little Insight Into 12 CSCS Behavioural Case Study Questions
All Around CITB Health Safety And Environment Test
My Top 11 Utility Tips for A Successful CSCS Exam

50 Full Efficiently Free Online CSCS Mock Test Questions

32.What should you do if you’re unsure about a particular topic discussed during a site induction?

Ask a colleague to clarify
Meet with the presenter at the end of the day to discuss it
Ask the presenter to explain further
Ask your health and safety rep to explain at your next break

28.For maximum protection when using a mask you should:

Ensure you’re using the correct type of mask for the job
Ensure you’re wearing the mask correctly
Ensure you’ve passed a face fit test for that specific mask
All of these answers

12.Protective mid-soles in your safety footwear are designed to:

Prevent you from twisting you ankle
Prevent chemical burns if you step on hazardous chemicals
Ensure your footwear remains comfortable throughout the day
Protect your feet from nails and other sharp objects

18.Over time, excess noise can damage your hearing. Which of these is an early sign of this?

Infections of the inner ear
There are no early signs
A rash may appear around the outside of your ear
A ringing sound or even a temporary hearing loss may occur

38.Which of these two types of fire extinguishers are most suitable for use on electrical fires? Choose two answers.

Water
Foam
Wet Chemical
CO2
Dry Powder

10.What should you do if you need to use a mobile tower scaffold but the wheel brakes aren’t working?

Ask a colleague to hold the tower while you work
Carry on using it only if the floor is level
Use a rock or a piece of wood to wedge the wheels and stop them from moving
Do not use it

31.All unsafe working practices should be reported immediately; whose responsibility is it to report unsafe working practices?

Your supervisor only
Only the site manager can do this
Only a health and safety rep can do this
It’s everyone’s responsibility to report unsafe working practices

36.What should you do if you discover a child wondering around on a construction site?

Escort the child to safety immediately
Just ignore it as it’s not your problem
Find your supervisor and report it
Find your site manager and report it

46.Wet chemical fire extinguishers are identified by which colour?

Red
Black
Blue
Yellow

7.What is the leading cause of death among construction workers?

Being hit by vehicles on site
Leptospirosis
Falling from height
Electrocution

8.Which of these statements is true about using ladders?

Only one person should work on a ladder
Two people can work on the same ladder if it is long enough
Two people can work on the same ladder if the supervisor approves
Two people can work on the same ladder only if someone else holds the ladder

30.Hand-arm vibration syndrome or vibration white finger can be described as:

A severe rash on your arm that‘s caused by exposure to hazardous substances
A sign that your hands are on the way to becoming permanently injured
An air borne disease that can affect your breathing
Frostbite that can lead to permanent damage to your arms and fingers

40.Which class of fire does magnesium and aluminium materials fall under?

Class D
Class B
Class A
Class F

6.All of the following statements are true about using podium steps EXCEPT?

You must ensure the wheels are locked before getting on
Podiums are 100% safe and cannot topple over
Like all other equipment podiums must be inspected regularly
Podiums can topple over so you must take care when reaching sideways

23.You are required to undertake some work that will produce dust. What will you need to do?

Only work for a short period of time
Avoid the work, as dust can harm your respiratory system
Begin working immediately; dust is hardly dangerous
Wear the correct personal protective equipment (PPE) and use devices that will control airborne dust

29.Before starting your shift you’re given a dust mask that’s too big and keeps falling off, what should you do?

Ask for a mask that fits securely and wait until you have the correct RPE before starting
Ask your colleague to borrow his mask then carry on working
Carry on working and get another one after your shift ends
Carry on working with the big mask until you can get another one

22.You need to sweep up dust that was created during your shift. You should:

Place a protective mask over your nose and mouth
Ensure that there has adequate ventilation
Dampen down the area
All of these

48.A risk assessment is important because?

It tells you who is in charge of health and safety at your worksite
It is used to delegate tasks among workers
It tells you where tools should be stored
It identifies hazards and tells you the safest way of performing a task

37.To help prevent injuries caused by manual handling you should do all the following EXCEPT:

Learn proper lifting and carrying techniques
Use lifting equipment
Disperse your items into smaller loads
Carry as much items as possible to get the task completed faster

9.What should you do if the ladder you’re about to use is damaged?

Carry on using the ladder but stay away from the damaged section
Try to fix the ladder yourself
Put the ladder in a corner and leave it there
Stop using it, report it and let your colleagues know the ladder is not safe

50.Hazardous substances can be identified by?

The symbol on the label
The colour of the container
The colour of the substance
It will have a blue label on the container

43.What should you do if you notice a safety hazard that no one else seems to notice?

Stay away from that area
Report it to your supervisor immediately
Keep on working and report it at the end of your shift
It’s not your responsibility to report this

49.After raising a fire alarm what’s the next thing you should do?

Hide under a desk
Find your supervisor and inform of the situation
Find your colleagues and take them out the building
Leave the building immediately

24.When using water to help control levels of dust when cutting, what should you do?

Make certain that you are using as much water as possible
Pour water onto a surface before you begin cutting
Ask a co-worker to stand next to you and pour water directly onto your workspace
Make sure that the flow of water is adjusted correctly

15.What should you do if you accidentally drop your safety helmet and crack it?

Get another one immediately
Wait until your break and get another one
Carry on working if it’s only a small crack
Wait until the end of your shift and get another one for the next day

11.Using eye protection is vital for onsite safety, when should you wear eye protection?

Only when you’re working with power tools
Only when you’re working with hazardous chemicals
When the task has a potential for eye injury and if the site rules demand it
Only when your eyes come into direct sunlight

25.What TWO methods can you use to reduce the amount of dust from becoming airborne?

Place a dust collector on the machine
Wear a protective mask
Keep your area neat
Work carefully and slowly
Wet cutting

39.In the event of a fire you should do all the following EXCEPT:

Tackle the fire if safe and trained to do so
Operate the nearest fire alarm
Call the fire brigade
Exit the building immediately using the nearest lift

41.When does your employer need to provide a first-aid box?

When the total number of employees exceeds 10
When the total number of employees exceeds 35
Every site should be equipped with a first-aid box regardless of the number of employees
First-aid boxes are provided at the company’s discretion and are not compulsory

14.Wearing a safety helmet in hot weather can be uncomfortable, which of these is true about wearing a safety helmet in hot weather?

You can drill small holes in your helmet to increase airflow and keep you cool
You can take it off for short periods of time while you’re working
You must keep it on at all times and ensure you’re wearing it correctly
You can wear it sideways if it’s more comfortable this way

4.Which of these must you do if you’re required to use an extension cable? (Choose two answers)

You must only uncoil the length you need to use
You must uncoil the entire cable
Check the entire length and cable connectors for damage
You must only check the length you need for damage

3.What should you do if the extension wire you need to use has a cut in the outer cover?

Report it immediately and make sure no one else uses it
Carry on using it but avoid going near the cut part
Use electrical tape to cover it and then carry on working
If you can’t see the copper wires inside then carry on using it

20.You believe that excess noise at the job site has damaged your hearing. What do you need to do?

Take a few sick days and rest
Have your doctor or employer arrange a hearing test for you
Place cotton wads in your ears to prevent any future damage
There is nothing that you can do. The damage is permanent and cannot be undone

34.As an employee it’s your responsibility to do all the following EXCEPT: (choose two answers)

Raise concerns about safety issues
Write your own risk assessments
Report unsafe working practices
Provide your own PPE

27.Disposable masks should be used no more than?

Seven working days
Nine working days
One day or one shift
Ten working days

45.Being exposed to engine oil can cause?

Hearing problems
Skin problems
Lung cancer
Temporary loss of breath

16.Over time, excess noise can damage your ability to hear. Can such a condition be reversed?

Yes, but you will be forced to change your current job
With time, the condition may repair itself
The damage is permanent and cannot be reversed
You will need surgery to repair your hearing loss

13.What should you do if you’re given a task that requires you to wear a full body harness but you’ve never used one before?

Carry on and try to work it out yourself
Ask a colleague who wears one for advice
Ask for an expert to train you
Ask for the instruction manual and figure it out yourself

1.What should you do if the guard from a power tool you need to use is missing?

Improvise and make your own
Carry on using it but be very careful and work very slowly
Use the tool as fast as you can to complete the task quickly
Do not use the tool unless you get the correct guard fitted

33.Prohibition notices are given to equipment that:

Only supervisors can use
Only managers can use
Only skilled workers can use
Should not be used until it’s made safe

2.If you need to operate a power tool you must be:

Trained and competent
At least 16 years old
At least 18 years old
At least 21 years old

35.In the event of an accident a first aider can do all the following EXCEPT:

Perform CPR
Bandage your cuts or wounds
Move you while you’re unconscious
Prescribe and give you medicines to help you recover

17.You have just finished working with a particularly noisy piece of equipment and you have a ringing in your ears. What does this symptom imply?

Your body has been exposed to excess vibration
You may be coming down with the flu or a respiratory infection
The level of noise was high, but it was still safe
You’ve temporarily damaged your hearing

47.You witness a near miss and the worker involved is afraid of getting into trouble what should you do?

Have a chat with him and ask him to be careful next time
Report it
He seems ok so all is fine
Take him to your supervisor immediately

44.Why is it important for you to keep your working environment clean and tidy?

To prevent rats and other animals that could spread diseases
To reduce the risk of slips, trips and falls
To reduce environmental side effects
All of these

19.Give TWO separate answers as to how excess noise can affect your health.

Loss of hearing
Constant ear infections
An excess build-up of wax in your ears
Persistent headaches
A condition known as “vibration white finger”

5.Which of these must you do if you need to run an electrical cable across an area used by vehicles? (Choose two answers)

Ensure that you use yellow tape to wrap it as this would make it visible to drivers
Use spare wood or scaffold boards to cover the cable
Use a protective ramp to cover the cable
Put up a “Ramp Ahead” sign

42.Why are site inductions important?

The work site health and safety rules are discussed during the site induction
It gives you the opportunity to formally meet your colleagues
It allows you to have a look around at the work site
It gives you the opportunity to meet the site manager and supervisors

21.High levels of dust can be inhaled when performing tasks such as grinding, drilling, sanding and cutting. These levels are most dangerous when:

Working in a small room
Using the tool in a large, indoor area
Working outdoor on a calm day
Using the tool outside when it is windy

26.What should you do if the toilet on your worksite doesn’t work and is always in a messy state?

Avoid using the toilet
Investigate and try to fix the problem
Leave the site on your break and use the toilet in a nearby shop
Speak to your supervisor about the problem

Comments

andrew says

03/17/2015 at 14:40

For the 2 answer questions I can’t pick 2?

- Brenda Wilson says
  
  03/18/2015 at 02:20
  
  Hello Andrew, thank you so much for your comment. We got it, and we will have solution for this problem as soon as possible. Hope that you can move on other questions to prepare well for your exam. Good luck!:)
  
Dave Coombs says

04/20/2015 at 20:37

Great test 50 out of 51 .
The wet cutting question comes up with incorrect answer I believe .
I ticked control flow of water as my answer but it came back as incorrect and said get co worker to pour water directly ?

Still a good test to keep you thinking.

Thanks
Dave

- Marie Hall says
  
  04/21/2015 at 04:46
  
  Hello Dave Coombs,
  
  I tested that question:
  When using water to help control levels of dust when cutting, what should you do? ✖
  1. Make certain that you are using as much water as possible
  2. Pour water onto a surface before you begin cutting
  3. Ask a co-worker to stand next to you and pour water directly onto your workspace
  4. Make sure that the flow of water is adjusted correctly
  
  It’s multiple response question though, I made a mistake to format it as the single response type. That’s why you could not select all that apply. The correct answers to this question should be 3 and 4.
  
  Again, thank you a lot for reminding me of this mistake, and encouraging me with such a nice praise. I will be more careful later to avoid such unnecessary mistakes. Thank you:)
  
  Kind regards,
  
Spike curdie says

06/25/2015 at 21:26

Hi,

Done the full 50 questions and never got my results for some reason :/

- Brenda Wilson says
  
  06/26/2015 at 13:41
  
  Hello Spike Curdie, thanks so much for your visit and comment. However, please tell us about your problems when you cannot get your practice results. Normally, after finished your practice, you have to hit the submit button at the end in order to take full answers. Please try again and let us know about that! Good luck! 🙂
  
Mr dad says

07/22/2015 at 21:25

Hi there I’ve got 49 out of 50
But one is confused one .
Can anyone help .
I assume that I’ve selected the correct one which is no.4 ( make sure the water flow is adjusted correctly ) .

Here is the question

24.When using water to help control levels of dust when cutting, what should you do? ✖

1-Make certain that you are using as much water as possible
2-Pour water onto a surface before you begin cutting
3-Ask a co-worker to stand next to you and pour water directly onto your workspace
4-Make sure that the flow of water is adjusted correctly – Given

- Brenda Wilson says
  
  07/23/2015 at 11:29
  
  Hello Mr Dad, congratulation for your excellent practice (49 out of 50) first.
  From your feedback to our site. We have seen your problem and fixed these problem already. You can check again this test to memorize deeply the important information or move on other test to practice more. welcome!
  Especially, Many thanks for your support a lot to build this site become better.
  Good luck guy! 🙂
  
Mr dad says

07/26/2015 at 00:04

Thanks Brenda
I got 50 out of 50 this time .
I have a question ..
Are these questions are similar in the actual test ..? I mean to say similar sort of .
My test is on this Thursday .. I hope to get it right .
Wish me good luck though .
I’ve done 7 simulation tests and all passed .. But let’s see the actual exam ..
Bit nervous

Mr dad says

07/26/2015 at 00:06

Brilliant website to practice cscs test ..
Please upload new questions soon .
Many thanks and congrats for excellent preparation opportunity .

Mr dad says

07/27/2015 at 00:23

Done 3 different tests of 50 questions .
Got 50 out of 50 in all 3 .

Mr dad says

07/27/2015 at 00:23

My actual cscs exam is on Thursday .
I hope to pass it … Let’s see

Mr dad says

08/03/2015 at 23:01

Hi there .
I passed my real cscs today .
I got just one wrong .
I practiced on this site and helped me a lot .
Thanks guys for ur effort to make us proud .

- Brenda Wilson says
  
  08/04/2015 at 02:02
  
  Fantastic! Congratulation, Mr Dad. Best luck! 🙂