Hey Guys! If you have enjoyed in other article on our site before or somewhere and for sure that you will not too wonder about the concept of Cscs (construction skills certification scheme), because of the main aim on the construction that reduce the number of accidents on site and prevent the hazards and risks from working. Thus, all workers who are always required construction skills, qualification and competence to work well in their relevant work with passing the health, safety and environment test to get a Cscs on the card scheme. To help you be confident to pass successfully your test focusing on the the “General Responsibilities” section in the health and safety. We offer Top 20 Meaningful Spot of General Responsibilities – CSCS Test Revision. Especially, these revision notes will come in handy as it answers most of the knowledge questions from the general responsibilities section that you will face in your test. Please click here to get further information of Cscs.
Top 20 Meaningful Spot of General Responsibilities – CSCS Test Revision
Revision 1: If an HSE inspector inspects you working and issues an improvement notice this means that you are not working in a safe way.
Revision 2: Whenever you are at work, the Health and Safety at Work places legal duties on everyone at work not just employers.
Revision 3: It is important to note that you do not have responsibility to write your own risk assessment because it is the duty of your supervisor site or your employers. Let them provide risk assessment.
Revision 4: In order to protect yourself from the risks on the construction environment as like fire, height that we should try our best to maintain a clean and tidy working environment because of reducing the number of slips, trips and falls in the workplace and help prevent the hazards and risks from working environment.
Revision 5: If you turn up to work one day and someone says that the site has been issued with a prohibition notice this means you must stop all work as the site is unsafe for work.
Revision 6: If you need to use a tool which has been given a prohibition notice this means that the tool is unsafe and you should not use it until it has been made safe.
Revision 7: You should report to your supervisors or employers about the risks or hazards that you discover while working that is your responsibility you should carry out in your trade.
Revision 8: When you are working on the construction site, each workers will be always explained about the safety during their working and your responsibility attention to all safety topics discussed, and you do not understand or you have misunderstanding that you must ask immediately the presenter or your supervisor to be explained it again till you can understand about these.
Revision 9: If for some reason you believe that the safety rules explained at your site induction is outdated you should speak to your supervisor and share your opinion.
Revision 10: Reduce accident and keep along a safe environment on the construction industry site by informing unsafe working conditions to everyone to prevent the hazards and risks while working.
Revision 11: The Health and Safety at Work act is important to everyone at work because it places legal duties on employers to provide a safe working environment and it also places legal duties on you to follow the safe system of work that’s put in place.
Revision 12: The word “hazard” is quite common in any workplace. Actually, the term hazard is used to describe anything at work which has the potential to cause harm or injury to you.
Revision 13: Your site manager is responsible for managing health and safety on your construction site.
Revision 14: A risk assessment is vital for on-site safety as it identifies hazards and it explains how you can carry out a task safely.
Revision 15: We can all help to prevent accidents by reporting near misses and unsafe working conditions.
Revision 16: There are two key topics normally discussed at the site induction such as the site safety rules and the emergency procedures in place.
Revision 17: Everyone who will be working on-site should attend the site induction.
Revision 18: The term near miss is used to describe an accident which could have resulted in injury.
Revision 19: The term tool box talk is used to describe a short training session on a specific health and safety topic.
Revision 20: You can expect to learn about the site health and safety rules during the site induction.
You might be also interested in other CSCS Test Revision:
20 Short CSCS Test Revision On Fire Prevention And Control To Pass Successfully
18 Most Useful Information for CSCS Test Revision At Work Height
Top 20 Meaningful Spot of General Responsibilities – CSCS Test Revision
Beside Top 20 Meaningful Spot of General Responsibilities – CSCS Test Revision, I think that to pass successfully your test ta take a Cscs card in your hand, it is really important you should note that is a good preparation for your test. To get full of understanding about the concept of the “General Responsibilities section in your Cscs test that we offer you lots free online Cscs mock test questions and full answers which focus on most information included in your test. Don’t wait for your success that you should go ahead to it. Good luck!
Leave a Reply